Original 5810 FDD5810 TO-252 Ecu Car Transistor N FET 60V 35A

Original 5810 FDD5810 TO-252 Ecu Car Transistor N FET 60V 35A

IDR 45.000,- Kode barang - Stok Ready stock

 Original 5810  FDD5810 TO-252 Ecu Car Transistor N FET 60V 35A

DD5810 60V N-Channel Logic Level Trench MOSFET TO-252(DPAK) Reel,MOSFET LOW_VOLTAGE

Models : FDD5810 TO-252

Product Categories : Integrated Circuits (ICs), Transistor, Mosfet, Semiconductors

Package/Case : FDD5810 TO-252

Reference To Part : FDD5810 TO-252

Substitute : FDD5810 TO-252

Package included :

1 X FDD5810 TO-252

Agus Yulianto

Perum Puri Astapada Indah 2 Rt:08 Rw.03 Blok K No:6 

Plosogeneng Kec .Jombang, Kab.Jombang, Jawa Timur 61416
Hp.  0813-3278-7811 Kantor  0321-852845

Alamat Lokasi toko/rumah Google map

https://goo.gl/maps/7NZ4HMSYvvJ2

Tokopedia

https://www.tokopedia.com/obd2

Bukalapak

https://www.bukalapak.com/agusyulianto

Web  :

www.obd2jombang.com

Blog 

http://ToolsTeknik.blogspot.co.id

http://Obd2Jombang.blogspot.co.id

Facebook Agus Yuli Obd Jatim

https://www.facebook.com/obd99

IDR 45.000,- Kode barang - Stok Ready stock

 Original 5810  FDD5810 TO-252 Ecu Car Transistor N FET 60V 35A

DD5810 60V N-Channel Logic Level Trench MOSFET TO-252(DPAK) Reel,MOSFET LOW_VOLTAGE

Models : FDD5810 TO-252

Product Categories : Integrated Circuits (ICs), Transistor, Mosfet, Semiconductors

Package/Case : FDD5810 TO-252

Reference To Part : FDD5810 TO-252

Substitute : FDD5810 TO-252

Package included :

1 X FDD5810 TO-252

Agus Yulianto

Perum Puri Astapada Indah 2 Rt:08 Rw.03 Blok K No:6 

Plosogeneng Kec .Jombang, Kab.Jombang, Jawa Timur 61416
Hp.  0813-3278-7811 Kantor  0321-852845

Alamat Lokasi toko/rumah Google map

https://goo.gl/maps/7NZ4HMSYvvJ2

Tokopedia

https://www.tokopedia.com/obd2

Bukalapak

https://www.bukalapak.com/agusyulianto

Web  :

www.obd2jombang.com

Blog 

http://ToolsTeknik.blogspot.co.id

http://Obd2Jombang.blogspot.co.id

Facebook Agus Yuli Obd Jatim

https://www.facebook.com/obd99

Original 2sd357 D357 triode TO 220

Original 2sd357 D357 triode TO 220

IDR 10.000,- Kode barang - Stok Ready stock

Original 2sd357 D357 triode TO 220 

DESCRIPTION

· Collector-Emitter Breakdown Voltage-

: V(BR)CEO= 100V(Min)

· Good Linearity of hFE

· Complement to Type 2SB527

· Minimum Lot-to-Lot variations for robust device

performance and reliable operation

2SD357 Datasheet, Equivalent, Cross Reference Search

Type Designator: 2SD357

Material of Transistor: Si

Polarity: NPN

Maximum Collector Power Dissipation (Pc): 10 W

Maximum Collector-Base Voltage |Vcb|: 110 V

Maximum Collector-Emitter Voltage |Vce|: 100 V

Maximum Emitter-Base Voltage |Veb|: 5 V

Maximum Collector Current |Ic max|: 0.8 A

Max. Operating Junction Temperature (Tj): 150 °C

Transition Frequency (ft): 35 MHz

Forward Current Transfer Ratio (hFE), MIN: 55

Noise Figure, dB: -

Package: TO220

Package included :

D357 triode TO-220 

Perum Puri Astapada Indah 2 Rt:08 Rw.03 Blok K No:6 

Plosogeneng Kec .Jombang, Kab.Jombang, Jawa Timur 61416

Hp.  0813-3278-7811 Kantor  0321-852845

Alamat Lokasi toko/rumah Google map

https://goo.gl/maps/7NZ4HMSYvvJ2

Web  :

www.obd2jombang.com

Blog 

http://ToolsTeknik.blogspot.co.id

http://Obd2Jombang.blogspot.co.id

Tokopedia

https://www.tokopedia.com/obd2

Bukalapak

https://www.bukalapak.com/agusyulianto

Facebook Agus Yuli Obd Jatim

https://www.facebook.com/obd99

IDR 10.000,- Kode barang - Stok Ready stock

Original 2sd357 D357 triode TO 220 

DESCRIPTION

· Collector-Emitter Breakdown Voltage-

: V(BR)CEO= 100V(Min)

· Good Linearity of hFE

· Complement to Type 2SB527

· Minimum Lot-to-Lot variations for robust device

performance and reliable operation

2SD357 Datasheet, Equivalent, Cross Reference Search

Type Designator: 2SD357

Material of Transistor: Si

Polarity: NPN

Maximum Collector Power Dissipation (Pc): 10 W

Maximum Collector-Base Voltage |Vcb|: 110 V

Maximum Collector-Emitter Voltage |Vce|: 100 V

Maximum Emitter-Base Voltage |Veb|: 5 V

Maximum Collector Current |Ic max|: 0.8 A

Max. Operating Junction Temperature (Tj): 150 °C

Transition Frequency (ft): 35 MHz

Forward Current Transfer Ratio (hFE), MIN: 55

Noise Figure, dB: -

Package: TO220

Package included :

D357 triode TO-220 

Perum Puri Astapada Indah 2 Rt:08 Rw.03 Blok K No:6 

Plosogeneng Kec .Jombang, Kab.Jombang, Jawa Timur 61416

Hp.  0813-3278-7811 Kantor  0321-852845

Alamat Lokasi toko/rumah Google map

https://goo.gl/maps/7NZ4HMSYvvJ2

Web  :

www.obd2jombang.com

Blog 

http://ToolsTeknik.blogspot.co.id

http://Obd2Jombang.blogspot.co.id

Tokopedia

https://www.tokopedia.com/obd2

Bukalapak

https://www.bukalapak.com/agusyulianto

Facebook Agus Yuli Obd Jatim

https://www.facebook.com/obd99

GT2 Closed Loop Timing Belt Rubber 2GT 6 mm 3D Printers 110 160. 200. 280.400 mm

GT2 Closed Loop Timing Belt Rubber 2GT 6 mm 3D Printers 110 160. 200. 280.400 mm

IDR 00.000,- Kode barang - Stok Ready stock

GT2 Closed Loop Timing Belt Rubber 2GT 6 mm 3D Printers  110 mm 

GT2 Closed Loop Timing Belt Rubber 2GT 6 mm 3D Printers  110 160. 200. 280.400 mm 

Closed-Loop Timing Belt 110mm Synchronous Belts

Pictch : 2mm 

Width : 6mm 

Material : Rubber

Package included :

Timing Belt Rubber 2GT 6 mm 3D Printers  110 mm 

IDR 00.000,- Kode barang - Stok Ready stock

GT2 Closed Loop Timing Belt Rubber 2GT 6 mm 3D Printers  110 mm 

GT2 Closed Loop Timing Belt Rubber 2GT 6 mm 3D Printers  110 160. 200. 280.400 mm 

Closed-Loop Timing Belt 110mm Synchronous Belts

Pictch : 2mm 

Width : 6mm 

Material : Rubber

Package included :

Timing Belt Rubber 2GT 6 mm 3D Printers  110 mm 

GT2 Timing Pulley 40 teeth Bore 5mm width 6mm belt 3D printer part

GT2 Timing Pulley 40 teeth Bore 5mm width 6mm belt 3D printer part

IDR 30.000,- Kode barang - Stok Ready stock

GT2 Timing Pulley 40 teeth  Bore 5mm width 6mm belt 3D printer part

GT2 Timing Pulley 40 teeth Alumium Bore 5mm for width 6mm belt

Tooth number : 40

Tooth pitch : 2mm

Hole diameter : 5mm

Flange : double

Tooth width : 6.5mm

2PS Setscrews : M4X4 (Stainless steel) 

 

Packing list :

1pcs x 40 Teeth GT2 Timing Pulley 5mm Bore 

1pcs x M4 set screws

IDR 30.000,- Kode barang - Stok Ready stock

GT2 Timing Pulley 40 teeth  Bore 5mm width 6mm belt 3D printer part

GT2 Timing Pulley 40 teeth Alumium Bore 5mm for width 6mm belt

Tooth number : 40

Tooth pitch : 2mm

Hole diameter : 5mm

Flange : double

Tooth width : 6.5mm

2PS Setscrews : M4X4 (Stainless steel) 

 

Packing list :

1pcs x 40 Teeth GT2 Timing Pulley 5mm Bore 

1pcs x M4 set screws

GT2 Timing Pulley 30 teeth Bore 5mm width 6mm belt 3D printer part

GT2 Timing Pulley 30 teeth Bore 5mm width 6mm belt 3D printer part

IDR 30.000,- Kode barang - Stok Ready stock

GT2 Timing Pulley 30 teeth  Bore 5mm width 6mm belt 3D printer part

GT2 Timing Pulley 30 teeth Alumium Bore 5mm for width 6mm belt

Tooth number : 30

Tooth pitch : 2mm

Hole diameter : 5mm

Flange : double

Tooth width : 6.5mm

2PS Setscrews : M4X4 (Stainless steel) 

 

Packing list :

1pcs x 30 Teeth GT2 Timing Pulley 5mm Bore 

1pcs x M4 set screws

IDR 30.000,- Kode barang - Stok Ready stock

GT2 Timing Pulley 30 teeth  Bore 5mm width 6mm belt 3D printer part

GT2 Timing Pulley 30 teeth Alumium Bore 5mm for width 6mm belt

Tooth number : 30

Tooth pitch : 2mm

Hole diameter : 5mm

Flange : double

Tooth width : 6.5mm

2PS Setscrews : M4X4 (Stainless steel) 

 

Packing list :

1pcs x 30 Teeth GT2 Timing Pulley 5mm Bore 

1pcs x M4 set screws

GT2 Timing Pulley 16 teeth Bore 5mm width 6mm belt 3D printer part

GT2 Timing Pulley 16 teeth Bore 5mm width 6mm belt 3D printer part

IDR 20.000,- Kode barang - Stok Ready stock

GT2 Timing Pulley 16 teeth  Bore 5mm width 6mm belt 3D printer part

GT2 Timing Pulley 16 teeth Alumium Bore 5mm for width 6mm belt

Tooth number : 16

Tooth pitch : 2mm

Hole diameter : 5mm

Flange : double

Tooth width : 6.5mm

2PS Setscrews : M4X4 (Stainless steel) 

 

Packing list :

1pcs x 16 Teeth GT2 Timing Pulley 5mm Bore 

1pcs x M4 set screws

Perum Puri Astapada Indah 2 Rt:08 Rw.03 Blok K No:6 

Plosogeneng Kec .Jombang, Kab.Jombang, Jawa Timur 61416
Hp.  0813-3278-7811 Kantor  0321-852845

Alamat Lokasi toko/rumah Google map

https://goo.gl/maps/7NZ4HMSYvvJ2

Web  :

www.obd2jombang.com

Blog 

http://ToolsTeknik.blogspot.co.id

http://Obd2Jombang.blogspot.co.id

Tokopedia

https://www.tokopedia.com/obd2

Bukalapak

https://www.bukalapak.com/agusyulianto

Facebook Agus Yuli Obd Jatim

https://www.facebook.com/obd99

IDR 20.000,- Kode barang - Stok Ready stock

GT2 Timing Pulley 16 teeth  Bore 5mm width 6mm belt 3D printer part

GT2 Timing Pulley 16 teeth Alumium Bore 5mm for width 6mm belt

Tooth number : 16

Tooth pitch : 2mm

Hole diameter : 5mm

Flange : double

Tooth width : 6.5mm

2PS Setscrews : M4X4 (Stainless steel) 

 

Packing list :

1pcs x 16 Teeth GT2 Timing Pulley 5mm Bore 

1pcs x M4 set screws

Perum Puri Astapada Indah 2 Rt:08 Rw.03 Blok K No:6 

Plosogeneng Kec .Jombang, Kab.Jombang, Jawa Timur 61416
Hp.  0813-3278-7811 Kantor  0321-852845

Alamat Lokasi toko/rumah Google map

https://goo.gl/maps/7NZ4HMSYvvJ2

Web  :

www.obd2jombang.com

Blog 

http://ToolsTeknik.blogspot.co.id

http://Obd2Jombang.blogspot.co.id

Tokopedia

https://www.tokopedia.com/obd2

Bukalapak

https://www.bukalapak.com/agusyulianto

Facebook Agus Yuli Obd Jatim

https://www.facebook.com/obd99

Reduksi 3 1 Timing Belt Pulley GT2 60 Teeth 20 Teeth Reduction 3 1 3D printer

Reduksi 3 1 Timing Belt Pulley GT2 60 Teeth 20 Teeth Reduction 3 1 3D printer

IDR 85.000,- Kode barang - Stok Ready stock

Reduksi 3 1 Timing Belt Pulley GT2 60 Teeth 20 Teeth Reduction 3 1 3D printer

Accessories belt width 6mm Bore 5 US 20T5 60T5 200mm

Specification :

Tooth number : 60 & 20

Tooth pitch : 2 mm

Bore diameter : 5 mm 

Flange : double

Belt width : 6mm

 

Package included :

1 X 20Teeth

1 X 60Teeth

1 X Closed timing belt 280 mm

Untuk Info barang

0813 3278 7811

IDR 85.000,- Kode barang - Stok Ready stock

Reduksi 3 1 Timing Belt Pulley GT2 60 Teeth 20 Teeth Reduction 3 1 3D printer

Accessories belt width 6mm Bore 5 US 20T5 60T5 200mm

Specification :

Tooth number : 60 & 20

Tooth pitch : 2 mm

Bore diameter : 5 mm 

Flange : double

Belt width : 6mm

 

Package included :

1 X 20Teeth

1 X 60Teeth

1 X Closed timing belt 280 mm

Untuk Info barang

0813 3278 7811

Reduksi 3 1 Timing Belt Pulley GT2 60 Teeth 20 Teeth Reduction 3 1 3D printer

Reduksi 3 1 Timing Belt Pulley GT2 60 Teeth 20 Teeth Reduction 3 1 3D printer

IDR 90.000,- Kode barang - Stok Ready stock

Reduksi 3 1 Timing Belt Pulley GT2 60 Teeth 20 Teeth Reduction 3 1 3D printer

Accessories belt width 6mm Bore 5 US 20T5 60T5 200mm

Specification :

Tooth number : 60 & 20

Tooth pitch : 2 mm

Bore diameter : 5 mm 

Flange : double

Belt width : 6mm

 

Package included :

1 X 20Teeth

1 X 60Teeth

1 X Closed timing belt 200 mm

https://goo.gl/maps/7NZ4HMSYvvJ2

Web  :

www.obd2jombang.com

Blog 

http://ToolsTeknik.blogspot.co.id

http://Obd2Jombang.blogspot.co.id

Tokopedia

https://www.tokopedia.com/obd2

Bukalapak

https://www.bukalapak.com/agusyulianto

Facebook Agus Yuli Obd Jatim

https://www.facebook.com/obd99

IDR 90.000,- Kode barang - Stok Ready stock

Reduksi 3 1 Timing Belt Pulley GT2 60 Teeth 20 Teeth Reduction 3 1 3D printer

Accessories belt width 6mm Bore 5 US 20T5 60T5 200mm

Specification :

Tooth number : 60 & 20

Tooth pitch : 2 mm

Bore diameter : 5 mm 

Flange : double

Belt width : 6mm

 

Package included :

1 X 20Teeth

1 X 60Teeth

1 X Closed timing belt 200 mm

https://goo.gl/maps/7NZ4HMSYvvJ2

Web  :

www.obd2jombang.com

Blog 

http://ToolsTeknik.blogspot.co.id

http://Obd2Jombang.blogspot.co.id

Tokopedia

https://www.tokopedia.com/obd2

Bukalapak

https://www.bukalapak.com/agusyulianto

Facebook Agus Yuli Obd Jatim

https://www.facebook.com/obd99

GT2 Timing Pulley 60 Tooth Wheel Bore 5mm Aluminum 3D Printers

GT2 Timing Pulley 60 Tooth Wheel Bore 5mm Aluminum 3D Printers

IDR 50.000,- Kode barang - Stok Ready stock

GT2 Timing Pulley 60 Tooth Wheel Bore 5mm Aluminum 3D Printer

Tooth number: 60

Tooth pitch: 2mm

Bore diameter: 5mm

Flange: double

Belt width: 10mm

Tooth outside diameter : 37.7mm

Package included :

GT2 Timing Pulley 60

 

IDR 50.000,- Kode barang - Stok Ready stock

GT2 Timing Pulley 60 Tooth Wheel Bore 5mm Aluminum 3D Printer

Tooth number: 60

Tooth pitch: 2mm

Bore diameter: 5mm

Flange: double

Belt width: 10mm

Tooth outside diameter : 37.7mm

Package included :

GT2 Timing Pulley 60

 

Modul BMS Baterai 18650 4S 40A Li-Ion Lithium Battery Charger Pcb Bms Protection Board 16.8V

Modul BMS Baterai 18650 4S 40A Li-Ion Lithium Battery Charger Pcb Bms Protection Board 16.8V

IDR 44.000,- Kode barang - Stok Ready stock

Modul BMS Baterai 18650  4S 40A Li-Ion Lithium Battery Charger Pcb Bms Protection Board 16.8V

Cope: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650 polymer lithium battery)
Charging voltage: 16.8 V-18.1 V
Continuous discharge current (upper limit): 40 A (if the cooling environment is not good, reduce the use of charging current)
colour: green
Features:
4S 40A Li-ion Lithium Battery 18650 Charger PCB BMS Protection Board with Balance For Drill Motor 14.8V 16.8V Lipo Cell Module
4 string 16.8V 40A lithium battery protection board (comes with recovery function-AUTO Recovery)
Scope: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, polymer lithium battery)
Product Size: 46 * 60 * 3.4mm (balanced version)
Product weight: 10.3g (balanced version)
Charging voltage: 16.8V - 18.1V
Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use)
Continuous charge current (upper limit): 20A
Equalization version: suitable for starting current below 80A, power 135W below the drill.
Note:
1: The successful start of the drill requires three 15C-20C power battery, or six 10C-15C power battery (ordinary 18650 can not start the drill!!).
2: strictly according to map wiring 0V, 4.2V, 8.4V, 12.6V, 16.8V, do not deliberately short circuit.
3: When the load of the brush motor is used, try to connect a non-polar capacitor (withstand voltage above 25V, capacity 10uF-100uF) to the motor's positive and negative terminals to prevent the reverse spike from the motor. Break the MOS tube.
4: 4 groups of batteries in series, please ensure that the voltage of each group of batteries, if not the same, please fill each battery separately and then use in series. The The Discharge test, the voltage drop faster battery that group is poor battery.

 Package included :
1 4S 40A Li-ion Lithium Battery 18650 Charger PCB BMS Protection Board with balance

IDR 44.000,- Kode barang - Stok Ready stock

Modul BMS Baterai 18650  4S 40A Li-Ion Lithium Battery Charger Pcb Bms Protection Board 16.8V

Cope: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650 polymer lithium battery)
Charging voltage: 16.8 V-18.1 V
Continuous discharge current (upper limit): 40 A (if the cooling environment is not good, reduce the use of charging current)
colour: green
Features:
4S 40A Li-ion Lithium Battery 18650 Charger PCB BMS Protection Board with Balance For Drill Motor 14.8V 16.8V Lipo Cell Module
4 string 16.8V 40A lithium battery protection board (comes with recovery function-AUTO Recovery)
Scope: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, polymer lithium battery)
Product Size: 46 * 60 * 3.4mm (balanced version)
Product weight: 10.3g (balanced version)
Charging voltage: 16.8V - 18.1V
Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use)
Continuous charge current (upper limit): 20A
Equalization version: suitable for starting current below 80A, power 135W below the drill.
Note:
1: The successful start of the drill requires three 15C-20C power battery, or six 10C-15C power battery (ordinary 18650 can not start the drill!!).
2: strictly according to map wiring 0V, 4.2V, 8.4V, 12.6V, 16.8V, do not deliberately short circuit.
3: When the load of the brush motor is used, try to connect a non-polar capacitor (withstand voltage above 25V, capacity 10uF-100uF) to the motor's positive and negative terminals to prevent the reverse spike from the motor. Break the MOS tube.
4: 4 groups of batteries in series, please ensure that the voltage of each group of batteries, if not the same, please fill each battery separately and then use in series. The The Discharge test, the voltage drop faster battery that group is poor battery.

 Package included :
1 4S 40A Li-ion Lithium Battery 18650 Charger PCB BMS Protection Board with balance

KP08 8mm Bracket Bearing Pillow Block Shaft Support Mounted

KP08 8mm Bracket Bearing Pillow Block Shaft Support Mounted

IDR 48.000,- Kode barang - Stok Ready stock

KP08 8mm Bracket Bearing Pillow Block Shaft Support Mounted 

KP08 8mm Kirksite Bearing Insert Shaft Support Zinc Alloy Mounted
Bracket Bearing Pillow Block
Bracket Bearing
Bore 8mm
Dilengkapi dengan bearing

Description:
• 100% brand new and high quality
• Bearing inner ring comes with top set screws which makes the inner ring of the bearing fix on the shaft. It is very convenient to install
• There is a certain self-aligning ability for the bearing, so it can be mounted on a general accuracy rack. Well-adapted and widely used
• Two-bolt housing with ball bearing insert for ready-to-mount installation
• Setscrew locking collar for secure attachment to guided shaft
• Between the inner bearing and outer fixing ring angle can fine tune

Specification:
Zinc Alloy Bearing Units (KP series)
Item  : KP08 Pillow Block Bearing
Material         : Housing : Zinc Alloy
Bearing          : Bearing Steel
Model : KP08
Inside diameter  : 8 mm
Base : (L*W) 6.7*1.6 cm (Approx.)
Total height : 3.4 cm
Pulley external diameter: 2.7 cm

Package includes:
1 X KP08 8mm Pillow Block Bearing
1 X incluide bearing

IDR 48.000,- Kode barang - Stok Ready stock

KP08 8mm Bracket Bearing Pillow Block Shaft Support Mounted 

KP08 8mm Kirksite Bearing Insert Shaft Support Zinc Alloy Mounted
Bracket Bearing Pillow Block
Bracket Bearing
Bore 8mm
Dilengkapi dengan bearing

Description:
• 100% brand new and high quality
• Bearing inner ring comes with top set screws which makes the inner ring of the bearing fix on the shaft. It is very convenient to install
• There is a certain self-aligning ability for the bearing, so it can be mounted on a general accuracy rack. Well-adapted and widely used
• Two-bolt housing with ball bearing insert for ready-to-mount installation
• Setscrew locking collar for secure attachment to guided shaft
• Between the inner bearing and outer fixing ring angle can fine tune

Specification:
Zinc Alloy Bearing Units (KP series)
Item  : KP08 Pillow Block Bearing
Material         : Housing : Zinc Alloy
Bearing          : Bearing Steel
Model : KP08
Inside diameter  : 8 mm
Base : (L*W) 6.7*1.6 cm (Approx.)
Total height : 3.4 cm
Pulley external diameter: 2.7 cm

Package includes:
1 X KP08 8mm Pillow Block Bearing
1 X incluide bearing

High Quality ER11 Collet Chuck Motor Shaft Extension Spindle Collet 5mm For CNC

High Quality ER11 Collet Chuck Motor Shaft Extension Spindle Collet 5mm For CNC

IDR 150.000,- Kode barang - Stok Ready stock

High Quality ER11 Collet Chuck Motor Shaft Extension Spindle Collet 5mm For CNC 

ER11 Collet Chuck Motor Shaft Extension Rod Spindle Collet Lathe Tools Holder Inner 5mm  For CNC Milling Boring Grinding

Description:
This collet is made of high quality steel for milling lathe tool and work-holding engraving machine. ER straight rod type collet extension handle body is relatively long, suitable for deep hole processing. The nut can be directly tightened to provide a powerful clamping force. This collet  can reduce costs, improve efficiency and would be a good replacement part for your old one.

Features:
• This motor shaft collet is made of high quality steel material, straight shank with clamping nut to be tightened.
• Extension rod diameter and the other parts are precision ground to eliminate unbalance, increase safety when cutting.
• Straight extended shank fits for deep processing, meeting the needs of extending the depth of processing.
• Collet is well packed in a protective container with label for safe transportation and storage.
• It is widely used in boring, milling, drilling, tapping, grinding and other processing.

Specifications:
Type : ER11A-5mm  Material: Steel
Height : 40mm / 1.57"
Shaft Diameter : 16mm / 0.63"
Shaft Inner Diameter : 5mm(±0.02mm) / 0.19" 8mm(±0.02mm) / 0.31"
Nut Diameter : 19mm / 7.48"
Nut Inner Diameter : 9mm / 3.54"

Package Includes:
1 x Collet Inner 5mm


Untuk Info barang
Whatsapp : 081332787811

IDR 150.000,- Kode barang - Stok Ready stock

High Quality ER11 Collet Chuck Motor Shaft Extension Spindle Collet 5mm For CNC 

ER11 Collet Chuck Motor Shaft Extension Rod Spindle Collet Lathe Tools Holder Inner 5mm  For CNC Milling Boring Grinding

Description:
This collet is made of high quality steel for milling lathe tool and work-holding engraving machine. ER straight rod type collet extension handle body is relatively long, suitable for deep hole processing. The nut can be directly tightened to provide a powerful clamping force. This collet  can reduce costs, improve efficiency and would be a good replacement part for your old one.

Features:
• This motor shaft collet is made of high quality steel material, straight shank with clamping nut to be tightened.
• Extension rod diameter and the other parts are precision ground to eliminate unbalance, increase safety when cutting.
• Straight extended shank fits for deep processing, meeting the needs of extending the depth of processing.
• Collet is well packed in a protective container with label for safe transportation and storage.
• It is widely used in boring, milling, drilling, tapping, grinding and other processing.

Specifications:
Type : ER11A-5mm  Material: Steel
Height : 40mm / 1.57"
Shaft Diameter : 16mm / 0.63"
Shaft Inner Diameter : 5mm(±0.02mm) / 0.19" 8mm(±0.02mm) / 0.31"
Nut Diameter : 19mm / 7.48"
Nut Inner Diameter : 9mm / 3.54"

Package Includes:
1 x Collet Inner 5mm


Untuk Info barang
Whatsapp : 081332787811

High Quality ER11 Collet Chuck Motor Shaft Extension Spindle Collet 5mm For CNC

High Quality ER11 Collet Chuck Motor Shaft Extension Spindle Collet 5mm For CNC

IDR 160.000,- Kode barang - Stok Ready stock

High Quality ER11 Collet Chuck Motor Shaft Extension Spindle Collet 5mm For CNC 

ER11 Collet Chuck Motor Shaft Extension Rod Spindle Collet Lathe Tools Holder Inner 5mm  For CNC Milling Boring Grinding

Description:
This collet is made of high quality steel for milling lathe tool and work-holding engraving machine. ER straight rod type collet extension handle body is relatively long, suitable for deep hole processing. The nut can be directly tightened to provide a powerful clamping force. This collet  can reduce costs, improve efficiency and would be a good replacement part for your old one.

Features:
• This motor shaft collet is made of high quality steel material, straight shank with clamping nut to be tightened.
• Extension rod diameter and the other parts are precision ground to eliminate unbalance, increase safety when cutting.
• Straight extended shank fits for deep processing, meeting the needs of extending the depth of processing.
• Collet is well packed in a protective container with label for safe transportation and storage.
• It is widely used in boring, milling, drilling, tapping, grinding and other processing.

Specifications:
Type : ER11A-5mm  Material: Steel
Height : 40mm / 1.57"
Shaft Diameter : 16mm / 0.63"
Shaft Inner Diameter : 5mm(±0.02mm) / 0.19" 8mm(±0.02mm) / 0.31"
Nut Diameter : 19mm / 7.48"
Nut Inner Diameter : 9mm / 3.54"

Package Includes:
1 x Collet Inner 5mm

IDR 160.000,- Kode barang - Stok Ready stock

High Quality ER11 Collet Chuck Motor Shaft Extension Spindle Collet 5mm For CNC 

ER11 Collet Chuck Motor Shaft Extension Rod Spindle Collet Lathe Tools Holder Inner 5mm  For CNC Milling Boring Grinding

Description:
This collet is made of high quality steel for milling lathe tool and work-holding engraving machine. ER straight rod type collet extension handle body is relatively long, suitable for deep hole processing. The nut can be directly tightened to provide a powerful clamping force. This collet  can reduce costs, improve efficiency and would be a good replacement part for your old one.

Features:
• This motor shaft collet is made of high quality steel material, straight shank with clamping nut to be tightened.
• Extension rod diameter and the other parts are precision ground to eliminate unbalance, increase safety when cutting.
• Straight extended shank fits for deep processing, meeting the needs of extending the depth of processing.
• Collet is well packed in a protective container with label for safe transportation and storage.
• It is widely used in boring, milling, drilling, tapping, grinding and other processing.

Specifications:
Type : ER11A-5mm  Material: Steel
Height : 40mm / 1.57"
Shaft Diameter : 16mm / 0.63"
Shaft Inner Diameter : 5mm(±0.02mm) / 0.19" 8mm(±0.02mm) / 0.31"
Nut Diameter : 19mm / 7.48"
Nut Inner Diameter : 9mm / 3.54"

Package Includes:
1 x Collet Inner 5mm

ER11 Collet 7Pcs with 5mm ER11A Extension Rod DIY CNC

ER11 Collet 7Pcs with 5mm ER11A Extension Rod DIY CNC

IDR 350.000,- Kode barang - Stok Ready stock

ER11 Collet 7Pcs with 5mm ER11A Extension Rod DIY CNC 

Specification:
ER11 Collets 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm
• Brand new
• Material: high grade 45 carbon steel
• Color: silver
• Total height: approx. 18mm
• Outer diameter (max): approx. 11.5mm

ER11A 5mm Extension Rod:
• Brand new
• Material: steel
• Height: approx. 38mm (when the lock nut)
• Shaft Hole: 5mm (+0.02 mm) the need to install heating expansion
• ER11A Nut: Outside hexagonal nut 19 mm maximum overall diamete
• High strength and hardness.
• Durable in use.

Package included:
• 1 x  ER11A 5mm Extension Rod
• 1 x  ER11 Collets 1mm
• 1 x  ER11 Collets 2mm
• 1 x  ER11 Collets 3mm
• 1 x  ER11 Collets 4mm
• 1 x  ER11 Collets 5mm
• 1 x  ER11 Collets 7mm

Agus Yulianto
Perum Puri Astapada Indah 2 Blok K No:6 Plosogeneng
Kec .Jombang, Kab.Jombang, Jawa Timur 61416 Indonesia

IDR 350.000,- Kode barang - Stok Ready stock

ER11 Collet 7Pcs with 5mm ER11A Extension Rod DIY CNC 

Specification:
ER11 Collets 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm
• Brand new
• Material: high grade 45 carbon steel
• Color: silver
• Total height: approx. 18mm
• Outer diameter (max): approx. 11.5mm

ER11A 5mm Extension Rod:
• Brand new
• Material: steel
• Height: approx. 38mm (when the lock nut)
• Shaft Hole: 5mm (+0.02 mm) the need to install heating expansion
• ER11A Nut: Outside hexagonal nut 19 mm maximum overall diamete
• High strength and hardness.
• Durable in use.

Package included:
• 1 x  ER11A 5mm Extension Rod
• 1 x  ER11 Collets 1mm
• 1 x  ER11 Collets 2mm
• 1 x  ER11 Collets 3mm
• 1 x  ER11 Collets 4mm
• 1 x  ER11 Collets 5mm
• 1 x  ER11 Collets 7mm

Agus Yulianto
Perum Puri Astapada Indah 2 Blok K No:6 Plosogeneng
Kec .Jombang, Kab.Jombang, Jawa Timur 61416 Indonesia

ER11 13 PCS Spring Collet Set for DIY CNC Engraving Machine 13Pcs

ER11 13 PCS Spring Collet Set for DIY CNC Engraving Machine 13Pcs

IDR 230.000,- Kode barang - Stok Ready stock

ER11 13 PCS Spring Collet Set for DIY CNC Engraving Machine 13Pcs 

Technical Parameters:
 - Model ;ER11
 - Material;High Grade 1065 Carbon Steel
 - Condition; Brand New
 - Run-Out Tolerance;0.015MM(0.0006")
 - Gripping Range;1MM to 7MM (1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm)
 - We've had a customer satisfaction guarantee for a long time, So Just go for it

Package Includes 13 PCS x ER11 Collets :
1.  1Pcs Er 11 1 mm
2.  1Pcs Er 11 1.5 mm
3.  1Pcs Er 11 2 mm
4.  1Pcs Er 11 2.5 mm
5.  1Pcs Er 11 3 mm
6.  1Pcs Er 11 3.5 mm
7.  1Pcs Er 11 4 mm
8.  1Pcs Er 11 4.5 mm
9.  1Pcs Er 11 5 mm
10.  1Pcs Er 11 5.5 mm
11.  1Pcs Er 11 6 mm
12.  1Pcs Er 11 6.5 mm
13.  1Pcs Er 11 7 mm

Agus Yulianto
Perum Puri Astapada Indah 2 Blok K No:6 Plosogeneng
Kec .Jombang, Kab.Jombang, Jawa Timur 61416 Indonesia

Hp.  0813-3278-7811 Kantor  0321-852845

IDR 230.000,- Kode barang - Stok Ready stock

ER11 13 PCS Spring Collet Set for DIY CNC Engraving Machine 13Pcs 

Technical Parameters:
 - Model ;ER11
 - Material;High Grade 1065 Carbon Steel
 - Condition; Brand New
 - Run-Out Tolerance;0.015MM(0.0006")
 - Gripping Range;1MM to 7MM (1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm)
 - We've had a customer satisfaction guarantee for a long time, So Just go for it

Package Includes 13 PCS x ER11 Collets :
1.  1Pcs Er 11 1 mm
2.  1Pcs Er 11 1.5 mm
3.  1Pcs Er 11 2 mm
4.  1Pcs Er 11 2.5 mm
5.  1Pcs Er 11 3 mm
6.  1Pcs Er 11 3.5 mm
7.  1Pcs Er 11 4 mm
8.  1Pcs Er 11 4.5 mm
9.  1Pcs Er 11 5 mm
10.  1Pcs Er 11 5.5 mm
11.  1Pcs Er 11 6 mm
12.  1Pcs Er 11 6.5 mm
13.  1Pcs Er 11 7 mm

Agus Yulianto
Perum Puri Astapada Indah 2 Blok K No:6 Plosogeneng
Kec .Jombang, Kab.Jombang, Jawa Timur 61416 Indonesia

Hp.  0813-3278-7811 Kantor  0321-852845

Power Supply Switching 12v 5A PSU Driver

Power Supply Switching 12v 5A PSU Driver

IDR 00.000,- Kode barang - Stok Ready stock

Power Supply Switching 12v 5A PSU Driver

Power supply switching Adaptor Multifungsi Handal
Terdapat indikator led warna biru untuk menandakan psu tsb hidup.

Spesifikasi :
Tegangan input : AC 100-240V (50/60 Hz)
Tegangan output : 12V
Arus output : max 5A

Package Include :
1 X power supply
1 X Kabel Power Supply

IDR 00.000,- Kode barang - Stok Ready stock

Power Supply Switching 12v 5A PSU Driver

Power supply switching Adaptor Multifungsi Handal
Terdapat indikator led warna biru untuk menandakan psu tsb hidup.

Spesifikasi :
Tegangan input : AC 100-240V (50/60 Hz)
Tegangan output : 12V
Arus output : max 5A

Package Include :
1 X power supply
1 X Kabel Power Supply

M95640-WDW6TP Car Memory Chips For Honda Accord Automotive PC Edition

M95640-WDW6TP Car Memory Chips For Honda Accord Automotive PC Edition

IDR 50.000,- Kode barang - Stok Ready stock

95640 564WP 9564 WQ 9564WQ M95640-WDW6TP Car Memory Chips For Honda Accord Automotive PC Edition

95640 564WP 9564 WQ 9564WQ M95640-WDW6TP Car Memory Chips For Honda Accord Automotive PC Edition
Manufacturer : ST.
Part Reference : 95640.
Encapsulation : SOIC-8.
Substitute : ST 95640.
Can Be Found : ECU EDC7, EDC16 Iveco, EDC16 S10 New, EDC16 VW, Hitachi Nissan, IAW 7GF, MJD 8F3, Valeo V42, etc.

Package Include :

1 X 95640 564WP 9564

IDR 50.000,- Kode barang - Stok Ready stock

95640 564WP 9564 WQ 9564WQ M95640-WDW6TP Car Memory Chips For Honda Accord Automotive PC Edition

95640 564WP 9564 WQ 9564WQ M95640-WDW6TP Car Memory Chips For Honda Accord Automotive PC Edition
Manufacturer : ST.
Part Reference : 95640.
Encapsulation : SOIC-8.
Substitute : ST 95640.
Can Be Found : ECU EDC7, EDC16 Iveco, EDC16 S10 New, EDC16 VW, Hitachi Nissan, IAW 7GF, MJD 8F3, Valeo V42, etc.

Package Include :

1 X 95640 564WP 9564

Frame CNC DIY 400 x 330 x 240 mm Alumunium 20 x 20 mm

Frame CNC DIY 400 x 330 x 240 mm Alumunium 20 x 20 mm

IDR 900.000,- Kode barang - Stok Ready stock

Frame CNC DIY 400 x  330 x 240 mm Alumunium 20 x 20 mm

Rack material : Hard aluminum 20x20 mm
Frame size : 400*330*240mm
Bolt : Stainless steel
hex socket screws : M5*6 mm
cylinder head bolt

Package Include :
1 Set Frame CNC DIY 400 x  330 x 240mm

Catatan 
Kelengkapan Sesuai Foto,,dan barang dikirim belum dirakit cara rakit sesuai foto (gambar)

IDR 900.000,- Kode barang - Stok Ready stock

Frame CNC DIY 400 x  330 x 240 mm Alumunium 20 x 20 mm

Rack material : Hard aluminum 20x20 mm
Frame size : 400*330*240mm
Bolt : Stainless steel
hex socket screws : M5*6 mm
cylinder head bolt

Package Include :
1 Set Frame CNC DIY 400 x  330 x 240mm

Catatan 
Kelengkapan Sesuai Foto,,dan barang dikirim belum dirakit cara rakit sesuai foto (gambar)

Linear Rail Sliding Bar Double Sliding dan double Ball Bearing

Linear Rail Sliding Bar Double Sliding dan double Ball Bearing

IDR 37.000,- Kode barang - Stok Ready stock

Linear Rail Sliding Bar Double Sliding dan double  Ball Bearing 

Deskripsi Produk
Sliding Bar Double Sliding dan double  Ball Bearing
Lebar   : 35,5 mm
Tinggi : 15 mm

Panjang
Normal     : 560 mm
Sliding Pertama : 830,5 mm
Sliding ke Dua : 117,5 mm

Sliding Bar Double Sliding sangat kuat dan kokoh bekas mesin fotocopy, untuk itu biasanya di gunakan juga untuk part sliding CNC DIY maupun mini bor duduk serta gerinda sliding mengingat bahan yang sangat kokoh

Catatan “ 
Sliding Bar Double Sliding dan double  Ball Bearing kondisi bekas akan tetapi layak pakai dan kinclong

Package Include :
1 Unit Sliding Bar Double Sliding dan double  Ball Bearing

IDR 37.000,- Kode barang - Stok Ready stock

Linear Rail Sliding Bar Double Sliding dan double  Ball Bearing 

Deskripsi Produk
Sliding Bar Double Sliding dan double  Ball Bearing
Lebar   : 35,5 mm
Tinggi : 15 mm

Panjang
Normal     : 560 mm
Sliding Pertama : 830,5 mm
Sliding ke Dua : 117,5 mm

Sliding Bar Double Sliding sangat kuat dan kokoh bekas mesin fotocopy, untuk itu biasanya di gunakan juga untuk part sliding CNC DIY maupun mini bor duduk serta gerinda sliding mengingat bahan yang sangat kokoh

Catatan “ 
Sliding Bar Double Sliding dan double  Ball Bearing kondisi bekas akan tetapi layak pakai dan kinclong

Package Include :
1 Unit Sliding Bar Double Sliding dan double  Ball Bearing

5x12mm jaw Shaft Coupler Flexible Coupling 25x30mm Shaft Coupler 5 mm To 12mm D25 L30

5x12mm jaw Shaft Coupler Flexible Coupling 25x30mm Shaft Coupler 5 mm To 12mm D25 L30

IDR 90.000,- Kode barang - Stok Ready stock

Shaft Coupler 5mm To 12mm Flexible Coupling  25x30mm 

5x12mm jaw Shaft Coupler Flexible Coupling 25x30mm Shaft Coupler 5 mm To 12mm D25 L30
Easy to install,buffer,damping,convenient to disconnect.
Shaft coupler often used to connect servo motor,
stepper motor, encoder, screw driving, machine platform, etc.

Specifications:
- Structure : Jaw / Spider
- Flexible or Rigid : Flexible
- Model Number : Spider Shaft Coupling
- Body Material : Aluminum Alloy
- Sleeve Material : Polyurethane
- Length         : 30mm
- Diameter : 25mm
- Shaft Diameter : 25mm
- Inner Diameter : 12mm

Package Included:
1x Motor Shaft Coupler Coupling

IDR 90.000,- Kode barang - Stok Ready stock

Shaft Coupler 5mm To 12mm Flexible Coupling  25x30mm 

5x12mm jaw Shaft Coupler Flexible Coupling 25x30mm Shaft Coupler 5 mm To 12mm D25 L30
Easy to install,buffer,damping,convenient to disconnect.
Shaft coupler often used to connect servo motor,
stepper motor, encoder, screw driving, machine platform, etc.

Specifications:
- Structure : Jaw / Spider
- Flexible or Rigid : Flexible
- Model Number : Spider Shaft Coupling
- Body Material : Aluminum Alloy
- Sleeve Material : Polyurethane
- Length         : 30mm
- Diameter : 25mm
- Shaft Diameter : 25mm
- Inner Diameter : 12mm

Package Included:
1x Motor Shaft Coupler Coupling